Aluminum Steel Plate

Aluminum is the second most widely specified metal in buildings after steel, and is used in all construction sectors, from commercial buildings to domestic dwellings.

Aluminum is incredibly popular because it is Lightweight, Strong, Resistant to corrosion, Durable, Ductile , Malleable, Conductive, Odorless.

Aluminum is also theoretically 100% recyclable with no loss of its natural properties. It also takes 5% of energy to recycle scrap aluminum the what is used to produce new aluminum.

other benefit of using aluminum is its air tightness. The cracks that can naturally occur in materials in the window frames and Major source of air leakage, which can increase the heating and cooling load of buildings.

One of the Aluminum’s primary appeals to specifiers is its exceptional strength o weight ration. At 2.7g/cm2, Aluminum is 666% lighter than steel. It is also far less susceptible to brittle fractures. Indeed, when aluminum and steel structures are compared, aluminum’s greater modulus of elasticity means that weight ratios of 1:2 are easily attained.

Aluminum Plate Typical Applications

• Pressure vessel Industry, alloy, 1xxx, 3xxx
• Ship building industry, allo 5xxx, 6xxx
• Vehicles industry, alloy 5xxx
• Machinery industry, alloy 5xxx, 6xxx, 7xxx

Type of Aluminum Steel Plates and Their usage

The main market sectors are windows, roofing, cladding, curtain walling and structural glazing, prefabricated buildings architectural hardware, H&V, shop fitting and partitions. Aluminum is also used extensively in plant, ladders and caffolding.

3000 SERIES ALUMINUM PLATE

As a result of it good property in anti-corrosion, this series aluminum plate is commonly used in moist environments like air conditioners, refrigerators, the bottom of cars. 3000 series aluminum plate are widely used in construction, decoration, pipe, packing, automobile, air conditioning, pot, containers, refrigeration, electrical and electronic products, etc.

500 SERIES ALUMINUM PLATE FEATURES

The main ingredient of this series aluminum plate is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy. With its low density, it features high tensile strength and elongation.

600 SERIES ALUMINUM PLATE

It is kind of aluminum plate which can be forged with cold treatment. It can be used in situations which have high demand in anti-corrosion and oxidation.
As a result of its good availability and its connector with super features, it is easily coated and has good process ability

Aluminum Steel Plate Specifications

It is kind of aluminum plate which can be forged with cold treatment. It can be used in situations which have high demand in anti-corrosion and oxidation.
As a result of its good availability and its connector with super features, it is easily coated and has good process ability

1. Grade:
   1. 1000 Series: 1050, 1060, 1070, 1100, 1200, 1235, etc.
   2. 2000 Series: 2014, 2024, etc.
   3. 3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc.
   4. 4000 Series: 4045, 4047, 4343, etc.
   5. 5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5454, 5754, 5A06, etc.
   6. 6000 Series: 6061, 6063, 6082, 6A02, etc.
   7. 700 Series: 7005, 7075, etc
   8. 8000 Series: 8006, 8011, 8079, etc.
2. Thickness: 0.20mm – 350mm
3. Width (Hot Rolled): 8mm – 3000mm, Width (cold Rolled): 5mm – 2600mm
4. Temper: all available, H1X, H2X, H3X, O, HXXX TX

Rectangular and Square Tube Prices in the Philippines

Our structural rectangular and square tube prices will be available based on the current Philippine market and therefore you are assured with a fair trade from us.

Carbon Steel Plates

Carbon Steel Plate is the best choice for the fabrication of numerous shapes and applications. Commonly used in the construction of bridges, buildings and ships, it’s also utilized in the fabrication of base plates, braces, liners, brackets, storage tanks, steel structure. This steel is particularly receptive to many work ability requirements – it can be, welded formed , machined, sheared, drilled, sawed, punched, bolted and riveted.

Carbon Steel Plate’s main interstitial alloying constituent is carbon, hence the name, at a variety of concentrations. As carbon percentage content rises, steel has the ability to become harder and stronger through heat-treating. high carbon steel is very strong. Low carbon steel is more malleable.

Types of Carbon Steel Plates and Their Usage

Carbon Structural Steel Plate

It is mostly used in construction industry and hence, the quality, durability, and performance have to be of highest standard. they have to withstand overweight load and pressure and must be corrosion resistant. It is known by by the name construction steel plate.

Boiler Steel Plate

These are high-pressure plates generally used in designing vessels, boilers, and heat containers. Carbon boiler steel plates have low corrosive property and can withstand low heat. Several layers of either chromium or nickel are added to make it suitable for usage in various environments.

Tank Steel Plate

These plates are used for building of oil and gas tanks, storage tanks, water tanks, and tanks for storage other all kinds of stuffs.

Carbon Shipbuilding Steel Plate
Shipbuilding Steel Plate – These plates are in high demand especially from oil and gas industry as they require thick plates of extremely good quality. Most of these are made according to the specifications of the customers and the steel used is certified because a small lamellar tear can be fatal.

Carbon Shipbuilding Steel Plate

These plates are in high demand especially from oil and gas industry as they require thick plates of extremely good quality. Most of these are made according to the specifications of the customers and the steel used is certified because a small lamellar tear can be fatal.

CARBON STEEL GRADES, CODES & SPECIFICATION

Carbon Steel Plate Prices in the Philippines

Our carbon steel plate prices will be available based on the current Philippine market and therefore you are assured of fair trade from us.

Stainless Steel Pipes (Stainless Pipes)

Pipe, hollow structure, usually cylindrical, for conducting materials. It is used primarily to convey liquids, gases, or solids suspended in a liquid, e.g., a slurry. It is also used as a conduit for electric wires. Sometimes it is used as a steel structure.

Stainless steel characteristically has a minimum Of 10.5% chromium by weight. means has a larger percentage of chromium in it as compared to carbon steel, which is what grants it the ability to resist corrosion.

Below are the Standards and Material grades for Stainless Pipes:

STANDARD: ASTM, DIN, EN, GB, JIS.

MATERIAL GRADE:

1. Austenitic: 201, 202, 301, 301L, 302, 303, 304, 304L, 304N, 305
2. Ferritic: 317L, 321, 347.904L,253Ma, 254SMO. 405, 409, 409L, 410.410S, 410L, 430, 430F, 436, 436L, 439, 443, 444.
3. Martensitic: 403, 414, 416, 420J1 , 420J2, 431 440A, 440B, 440C, 446,
4. Duplex: 15-5PH, 17-4PH/630, 17-7PH, 660A, 660B, 660C, 660D. S31803/2205, S32250, S32750, S32760, S31500, S31500, 32101, S32304

There are two(2) sub-categories for Stainless Steel Pipes. These are Stainless Steel Seamless Pipes and Stainless Steel Welded Pipes.

Stainless Steel SEAMLESS Pipes

Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable Historically seamless pipe was regarded as withstanding pressure better than other types. and was often more easily available than welded pipe.

Stainless Steel WELDED Pipes

Welded Pipes is manufactured by rolling metal and then welding it longitudinally across its length, therefore welded pipes have a welded joint in its cross-section. It can be ERW, EFW, LSAW, SSAW.

Stainless Steel Pipes (Stainless Pipes) Price

Our stainless pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

MILD STEEL (MS) PLATES

Mild steel is suitable for mechanical engineering and general purpose fabrication. Its strength makes it a terrific choice of material for the construction of cages, frames, fencing and in other applications where it will not be subjected to high stress.

Mild steel is a relatively ductile material as it contains a smaller amount of the hardening alloy – carbon – than other carbon steels. It has a low tensile strength of around 400MPa.

Carbon steel is sometimes referred to as ‘mild steel’ or ‘plain carbon steel’. The American Iron and Steel Institute defines a carbon steel as having no more than 2 % carbon and no other appreciable alloying element. Carbon steel makes up the largest part of steel production and is used in a vast range of applications.

Does Mild Steel Rust?

Yes. Mild steel, also known as carbon steel, will rust over time unless it is treated with some sort of protective coating to prevent the steel from coroding. Mild steel has a low carbon content, and the carbon does not help prevent the steel from rusting. Elements that are introduced to steel like molybdenum, titanium and chromium can improve the corrosion resistance of steel, but it does not make the steel rust proof.

Several common areas in which mild steel might be used:

• Structural steel
• Signs
• Cars
• Furniture and decorations
• Wire
• Fencing
• Nails

Mild Steel Plates

We offer a range of standard as well as in customized sizes and specifications of Mild Steel plates in the Philippines and worldwide.

Mild Steel Plate Prices

Solid Steel Supply has a wide selection of high-quality Mild SteeI Plates. Our MS Plate prices will be available based or the current market and therefore you are assured with a fair trade from us.

DONGKUK STEEL PLATES

Dongkuk Steel Mill Co, Ltd. is a steel company with its manufacturing plants are located in Pohang, Incheon, Dangjin and Busan. Main products are steel plates , beams, sections and bars mainly for construction. Also Dongkuk Steel mill is world’s forty-ninth largest steel maker among IISI member companies(2009)

DONGKUK Plates

We offer a range of standard as well as in customized sizes and specifications of Dongkuk Steel plates in the Philippines and worldwide.

DONGKUK Steel Plate Prices

VSteel Metal Asia has a wide selection of high-quality Dongkuk SteeI Plates. Our Dongkuk Steel Plate prices will be available based on the current market and therefore you are assured of fair trade from us.

POSCO Steel Plates

POSCO is a South Korean steel-making company headquartered in South Korea. In 2010, it was the world’s largest steel manufacturing company by market. POSCO currently operates two integrated steel mills in South Korea, in Pohang and Gwangyang.

POSCO’s Headquarters, along with the POSCO Center, form the ‘brain’ of the company, overseeing major tasks, such as the management, planning, and finances of the steelworks at Pohang and Gwangyang. The construction of POSCO headquarters at 1 Goedong-dong, Nam-gu, Pohang, was completed on April 1, 1987.

POSCO Plates

Solid Steel Supply has wide selection as well as in customize sizes and specification of POSCO Steel Plates in the Philippines and worldwide.

POSCO Steel Plate Prices

VSteel Metal Asia has a wide selection of high-quality POSCO Steel Plates. Our POSCO Steel Plate prices will be available based on the current market and therefore you are assured of fair trade from us.

Structural Steel

Structural Steel is a category of steel used for making construction materials in a variety of shapes. These are one of the core components of any manufacturing industry, construction and engineering.

Most structural steel shapes which VSteel Metal Asia can supply are:

• Bars – angle bar, flat bar, round bar, channel bar, square and rectangular bar
• Steel Beams – H-Beam, I-Beam, Wide Flange Beam
• Deformed Bars – also known as rebars or Reinforced Deformed Bars.
• HSS/Tubes – square tubes, rectangular tubes, circular or round tubes.

Structural Steel Price

Our structural steel prices will be available based on the current market and therefore you are assured with a fair trade from us.

Angle Bars, Flat Bars, and Channel Bars

Angle Bars

An Angle Bar, also known as an “L-bracket” or an “angle iron,” is a metal bracket in the form of a right angle. Angle bars can provide additional strength, and provide additional stability, They also provide both vertical and horizontal supports for buildings.

Flat Bars

Flat Bar is one of the most recognizable forms of steel, as it looks exactly like its name suggests. It has a flat surface and rectangular face — making it extremely versatile for a variety of projects and across all industries. Flat bars are available in a range of widths and thicknesses.

Channel Bars

Channel Bar or C-Channel Bar is a versatile product that is available in many sizes and thicknesses. Its cross-section is shaped like a squared-off C, with a straight back and two perpendicular extensions on the top and bottom. Steel channel has many uses. mostly structural.

Angle, Flat, Channel Bar Prices

Our angle bar, flat bar, and channel bar prices will be available based on the current market and therefore you are assured of fair trade from us. Please do not hesitate to send us your inquiries anytime with convenience.

Tubular Steel / Steel Tubes

Steel Tube is also known as Hollow Structural Section (HSS) is a type of metal profile with a hollow tubular cross-section. It is strong, tough, and durable. It can be welded or seamless. Its versatility lends it to a range of applications in different industries. Each year millions of tonnes of steel tubing are produced.

Steel tubing is a versatile material that is available in round, square, and rectangular shapes. It is typically made from a variety of different alloys, like aluminum and titanium, that provide its strength and other notable properties.

Steel tubing offers a combination of strength, durability, and affordability that make it the ideal choice for a wide range of applications, from heat exchangers to staircase handrails to truck and trailer manufacturing. Industrial Metal Supply offers steel tubes in a variety of standard sizes and profiles, as well as steel tubing options for specialty applications.

Hot Rolled Steel Tubing

This steel tube has been processed using very high temperatures and a series of rollers to make it easier to work with. Hot rolling keeps the material free from internal stresses. This type of tubing is found frequently in the construction industry, but not for precise applications.

Cold Rolled Steel Tubing

This steel tubing begins as hot rolled steel but is processed even further to create a more finished surface and provide additional strength. This process is more suited for applications that have strict tolerance, straightness, and surface condition requirements because cold rolling is a more precise finishing method.

Galvanized Steel Tubing

This steel tube has been treated with a galvanized coating that makes the material more resistant to corrosion and extends the material’s life. Because the material is corrosion-resistant, it is often used for structural tubing in projects like bridges and fences where it may be subjected to environmental conditions.

What is tubular steel made of?

Made from raw materials including iron, aluminum, carbon, manganese, titanium, vanadium, and zirconium, steel tubes are central to pipe production for applications spanning heating and plumbing systems, highway engineering, automobile manufacturing, and even medicine (for surgical implants and heart valves).

Common Applications of Tubular Steel

Steel has many uses throughout a variety of industries, and one of the most common and wide-ranging types is tubular steel or steel tubing. It resists corrosion and is lightweight but it’s much stronger than similarly sized plastic tubes. Custom steel tubing can be decorative and imaginative, or it can be simple and purely functional – with lots of space in between.

Applications For Steel Tube

Steel tubes are widely used in industrial and domestic settings. In industry, steel tubes are valued for their strength and ability to withstand extremes of temperature, pressure and destructive elements. In domestic settings, steel tubes are used in appliances and gas pipes. If you look behind your refrigerator you’ll likely see some steel tubing.

Top steel tubing applications include:

• Construction and Engineering – The construction and engineering industries use hollow structural sections (HSS). HSS is a form of steel tubing and is commonly circular, square, or rectangular. In the UK the term HSS is not used. Instead, the basic shapes are named CHS (circular), SHS (square), and RHS (rectangular). Rectangular HSS is commonly used in welded steel frames which are subjected to loading from different directions. Square and circular HSS are often used as columns.
• Automobile Manufacturing – The automobile industry has been using steel tubes in ever-increasing quantities since the early ‘90s. Precision steel tubes are used in the internal parts of the vehicle: in the suspension, fuel injection, and vehicle control systems.

For a cost-effective, high-strength material, tubular steel remains the best material for many applications.

Tubular Steel Prices

Our tubular steel prices will be available based on the current market and therefore you are assured of fair trade from us.

Steel Beam – Wide Flange Beam, H-Beam, and I-Beam

Hot-rolled steel beam with H-shaped cross section, used mainly in piling and retaining structures. H-beam is developed and optimized from I-beam, a kind of economical profiled steel with a better mechanics capabilities. The web plates and the flanges are in plumb. The inner flange runs parallel to the outer one. Its flanges are very straight and the edges are clear, especially named by the similarity between the section shape and the letter “H”.

Steel I-beams are used for a variety of structural applications. Specific terminology is used to describe I-beam characteristics and properties.

Steel I-beams can be found in nearly all construction projects, from skyscrapers and highways to residential construction and industrial cranes. The properties of the I-beam make it an optimal choice to balance beam strength and weight. Most of an I-beam’s cross sectional area is located away from the neutral axis of the beam, resulting in a high moment of inertia, or “I” value.

Steel Beams can be produced in accordance to different standards like ASTM, JIS, EN, BS, DIN.

Below are some of the most common sizes of steel beams.

Metric Sizes

Steel I-Beam, H-Beam, Wide Flange Beam Prices

Our steel i-beam, h-beam, and wide flange beam prices will be available based on the current market and therefore you are assured with a fair trade from us.

Steel Rebars – RC Bars, Deformed Bars, Reinforcing Bars

A steel rebar (short for reinforcing bar), also known as reinforcing steel, reinforcement steel, or a deformed bar, is a common steel bar, and is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression. It is usually formed from carbon steel, and is given ridges for better mechanical anchoring into the concrete.

The surface of the steel rebar may be patterned to form a better bond with the concrete.

Concrete is a material that is very strong in compression, but relatively weak in tension. To compensate for this imbalance in concrete’s behavior, rebar is cast into it to carry the tensile loads. Most steel reinforcement is divided into primary and secondary reinforcement, but there are other minor uses:

• Primary reinforcement refers to the steel which is employed to guarantee the resistance needed by the structure as a whole to support the design loads.
• Secondary reinforcement is employed for durability and aesthetic reasons., by providing enough localized resistance to limit cracking and resist stresses caused by effects such as temperature changes and shrinkage.
• Rebar is also employed to confer resistance to concentrated loads by providing enough localized resistance and stiffness for a load to spread through a wider area.
• Rebar may also be used to hold other steel bars in the correct position to accommodate their loads.
• External steel tie bars can constrain and reinforce masonry structures, as illustrated by the Nevyansk Tower or ancient structures in Rome and the Vatican.

Below table are the specifications and weight references for deformed bars:

* Maximum yield strength of Weldable steel bars shall not exceed 540 MPa
** Tensile strength shall not be less than 1.25 time the actual yield strength

Steel Rebars / Deformed Bar Prices

Our steel rebars / deformed bar prices will be available based on the current market and therefore you are assured with a fair trade from us. Please do not hesitate to send us your inquiries anytime with convenience.

Steel Pipes

Generally, steel pipe is a cylindrical tube made from steel and is the most utilized product in the steel industry. The primary use of steel pipes is in the transport of products – including oil, gas, and water over long distances. Steel pipes come in a variety of sizes and can also be used for structural requirements. Steel Pipes can be manufactured as Seamless or Welded according to uses and demand.

There are many raw materials for making and production Of pipes, but there are only two most commonly used materials for steel pipes. These are Carbon Steel and Stainless Steel which the uses may vary according to its purpose and applications.

Carbon Steel Pipes

In carbon steel, the main alloying element is carbon. It has a higher carbon content. which gives the steel a lower melting point, more malleability and durability, and better heat distribution.

Stainless Steel Pipes

Stainless steel characteristically has a minimum of 10.5% chromium by weight, means has a larger percentage of chromium in it as compared to carbon steel, which is what grants it the ability to resist corrosion.

Seamless Steel Pipes

Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable. Historically seamless pipe was regarded as withstanding pressure better than other types, and was often more easily available than welded pipe.

Welded Steel Pipes

Welded Pipe is manufactured by rolling metal and then welding it longitudinally across its length, therefore welded pipes have a welded joint in its cross-section.

Stainless Steel and Carbon Pipe Prices

Our stainless steel and carbon pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Carbon Steel Pipes (Carbon Pipes)

Pipe, hollow structure, usually cylindrical, for conducting materials. it is used primarily to convey liquids, gases, solid suspended in a liquid, e.g., a slurry. it is also used as conduit for electric wires. Sometimes it is used a steel structure.

In carbon steel, the main alloying element is carbon. it has higher carbon content, which gives the steel a lower melting point, more malleability and durability, and better heat distribution.

Most commonly used specs are SA/ASTM A106 Gr.B/C;API 5L Gr.B SA/ASTM A53-B; SGP; ASTM A333Gr.6/3; APL 5L X42, 52,60,65,70; ASTM A139 (Spiral Pipe); ASTM 795.

There are also surface treatment for most of Carbon Steel Pipes. Most common are Black Paint and Hot-Dipped Galvanized, where some of pipe derived its name – Black Iron Pipe (B.I Pipes) and Galvanized Iron Pipes (G.I Pipes).

There are two(2) sub-categories for Carbon Steel Pipes. These are Carbon Steel Pipes and Carbon Steel Welded Pipes.

Carbon Steel SEAMLESS Pipes

Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process doest not include any welding, seamless pipes are perceived to be stronger and more reliable, Historically seamless pipe was regarded as withstanding pressure better than other types, and was often more easily available than welded pipe.

Carbon Steel WELDED Pipes

Welded Pipe is manufactured by rolling metal and then welding it longitudinally across it’s length, therefore welded pipes have a welded joint in it’s cross=section. it can be ERW,EFW,LSAW,SSAW

Below are lists of Carbon Steel Pipes:

Carbon Steel Pipes (Carbon Pipes) Price

Our carbon pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Stainless Steel Pipes (Stainless Pipes)

Pipe, hollow structure, usually cylindrical, for conducting materials. It is used primarily to convey liquids, gases, or solids suspended in a liquid, e.g., a slurry. It is also used as a conduit for electric wires. Sometimes it is used as a steel structure.

Stainless steel characteristically has a minimum Of 10.5% chromium by weight. means has a larger percentage of chromium in it as compared to carbon steel, which is what grants it the ability to resist corrosion.

Below are the Standards and Material grades for Stainless Pipes:

STANDARD: ASTM, DIN, EN, GB, JIS.

MATERIAL GRADE:

1. Austenitic: 201, 202, 301, 301L, 302, 303, 304, 304L, 304N, 305
2. Ferritic: 317L, 321, 347.904L,253Ma, 254SMO. 405, 409, 409L, 410.410S, 410L, 430, 430F, 436, 436L, 439, 443, 444.
3. Martensitic: 403, 414, 416, 420J1 , 420J2, 431 440A, 440B, 440C, 446,
4. Duplex: 15-5PH, 17-4PH/630, 17-7PH, 660A, 660B, 660C, 660D. S31803/2205, S32250, S32750, S32760, S31500, S31500, 32101, S32304

There are two(2) sub-categories for Stainless Steel Pipes. These are Stainless Steel Seamless Pipes and Stainless Steel Welded Pipes.

Stainless Steel SEAMLESS Pipes

Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable Historically seamless pipe was regarded as withstanding pressure better than other types. and was often more easily available than welded pipe.

Stainless Steel WELDED Pipes

Welded Pipes is manufactured by rolling metal and then welding it longitudinally across its length, therefore welded pipes have a welded joint in its cross-section. It can be ERW, EFW, LSAW, SSAW.

Stainless Steel Pipes (Stainless Pipes) Price

Our stainless pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Copper Tubes/Copper Pipes

Copper Pipes are commonly used in the construction industry for water supply lines and refrigerant lines in HVAC (heating, cooling, and air-conditioning) systems. Copper pipes can be manufactured as soft or rigid copper and offer excellent corrosion-resistance and reliable connections. The three most common types of copper pipe used in residential and commercial construction are Type K, Type L, and Type M. A fourth type, used for drain-waste-vent, or DWV, piping, can be found in some older homes.

Copper Tubes/Pipes Applications

Type K Copper Tubes/Pipe

Copper Pipes are commonly used in the construction industry for water supply lines and refrigerant lines in HVAC (heating, cooling, and air-conditioning) systems. Copper pipes can be manufactured as soft or rigid copper and offer excellent corrosion-resistance and reliable connections. The three most common types of copper pipe used in residential and commercial construction are Type K, Type L, and Type M. A fourth type, used for drain-waste-vent, or DWV, piping, can be found in some older homes. Has the thickest wall of all the common types. It is used for water distribution, fire protection, oil, HVAC, and many other applications in the construction industry. Type K pipe is available in a rigid and flexible form and can be used with flared and compression fittings. It is recommended for main water lines and underground installations because its thickness helps it withstand the pressure from backfilled earth in trenches.

Type L Copper Tubes/Pipes

Used for interior plumbing, fire protection, and some HVAC applications. It is available in rigid and flexible forms and can be used with sweat, compression, and flare fittings. Type L is considered the most common type of copper piping, as it can be used in many more applications than Type K. Flexible Type L copper can be used to repair or replace old water lines, although rigid tubing is more durable. Type L also can be used outside the home where it will be directly exposed. Type L copper is thinner than Type K but thicker than type M.

Type M Copper Tubes/Pipes

Thinner than both type K and L copper. Sold in both rigid and flexible forms, Type M is used most commonly for domestic water service and vacuum systems. It can be used with sweat, compression, and flare fittings. Type M tubing is favored for residential work for its relatively low price; a thinner wall means less copper and thus a lower price. Type M copper is not always allowed by plumbing codes in all areas and applications. Always check with the local building authority for restrictions on its use.

COMMON STEEL GRADES

• ASTM B 88 – Standard Specification for Seamless Copper Water Tube
• ASTM B 42 – Standard Specification for Seamless Copper Pipe, Standard Sizes
• ASTM B 68 – Standard Specification for Seamless Copper Tube, Bright Annealed
• ASTM B 75 – Standard Specification for Seamless Copper Tube
• ASTM B 280 – Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
• ASTM B 447 – Standard Specification for Welded Copper Tube.
• ASTM B 837 – Standard specification for Seamless copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems.

Copper Tube/Copper Pipe Prices

Our copper tube prices will be available based on the current market and therefore you are assured with a fair trade from us. Please do not hesitate to send us your inquiries anytime with convenience.

Seamless Steel Pipes

Seamless (SMLS) pipe is formed by drawing a solid biller over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable. Historically seamless pipe was regarded as withstanding pressure better than other types, and was oftern more easily available then welded pipe.

Solid Steel has been supplying Seamless pipes for over 2000MT due to its high demand. It ensures to provide the standard specifications.

It also serves with Material, Product and/or Inspection Certificates (Mill Test Certificates) to assure its quality and for the satisfactory feedback from the client.

There are two(2) sub-categories for Seamless Steel Pipes. These are Carbon Steel Pipes and Stainless Steel Pipes.

Carbon Steel Seamless Pipes

In carbon steel, the main alloying element is carbon. It has a higher carbon content, which gives the steel a lower melting point, more malleability and durability, and better heat distributions

Stainless Steel Seamless Pipes

Stainless steel characteristically has a minimum of 10.5% chromium by weight, means has a larger percentage of chromium in it as compared to carbon steel, which is what grants it the ability to resist corrosion.

Seamless Pipe Prices

Our seamless pipe process will be available based on the current market and therefore you are assured with a fair trade from us.

Welded Steel Pipes (Welded Pipes)

Welded Pipe is manufactured by rolling metal and then welding it longitudinally across its length, therefore welded pipes have a welded joint in its cross-section.

There are two(2) sub-categories for Seamless Steel Pipes. These are Carbon Steel Pipes and Stainless Steel Pipes.

Carbon Steel Welded Pipes

In Carbon steel, the main alloying element is carbon, it has a higher carbon content, which gives the steel a lower melting point, more malleability and durability, and better heat distribution.

Stainless Steel Welded Pipes

Stainless steel characteristically has a minimum of 10.5% chromium by weight, means has a larger percentage of chromium in it as compared to carbon steel, which is what grants it the ability to resist corrosion.

Below are the types of Welded Steel Pipes:

ERW PIPES

Electric Resistance Welded (ERW) Pipes are welded longitudinally manufactured from Strip / Coil and can be manufactured upto 25″ OD. ERW pipe cold formed from a ribbon of steel pulled through a series of rollers and formed into a tube which is fused through a electric charge. It is mainly used for low / medium pressure applications such as transportation of water / oil. Applicable for both Stainless Steel Pipes and Carbon Steel Pipes.

EFW PIPES

Electric Fusion Welded (EFW) Pipe is a welded pipe formed by rolling plate and welding the seam. The EFW pipe is the most popular process for large diameter pipe uses a longitudinal seam weld. The welds are made by heating with an electric arc between the bare metal electrodes. Applicable only to Carbon Steel Pipes.

LSAW PIPES (Straight Welded Pipes)

Longitudinally Submerged Arc Welding (LSAW) pipes use single plate steel as raw material, applied double-sided submerged arc welding. The finished products have larger specifications and the welding joints have excellent ductility, plasticity and good sealing. LSAW pipes have large diameter, thick applicable only to Carbon Steel Pipes.

SSAW PIPES (Spiral Pipes, Spiral Welded Pipes)

SSAW Pipe (Spiral Submerged Arc-Welding Pipe) also called HSAW pipe, welding line shape like a helix. It is using the same welding technology of Submerged Arc-Welding with LSAW Pipes. Differently SSAW pipe is spiral welded where the LSAW is longitudinally welded. Manufacturing process is rolling the steel strip, to make the rolling direction have an angle with the direction of the pipe center, forming and welding, sot he welding seam is in a spiral line. Applicable only to Carbon Steel Pipes.

Welded Steel Pipe Prices

Our Welded Steel Pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Electric Resistance Welded (ERW) Pipes

Electric Resistance Welded (ERW) Pipes are welded longitudinally manufactured from Strip / Coil and can be manufactured upto 25″ OD. ERW pipe cold formed from a ribbon of steel pulled through a series of rollers and formed into a tube which is fused through a electric charge. It is mainly used for low / medium pressure applications such as transportation of water / oil. Applicable for both Stainless Steel Pipes and Carbon Steel Pipes.

ERW Pipe Prices

Our ERW Welded pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Spiral Welded Steel Pipe

Spiral welded steel pipe is a low carbon structural steel or a low alloy structural steel strip rolled into a tube blank with a certain helix angle (also called forming angle), and then welded and made into a pipe joint, which can use a narrow strip steel production of large diameter steel pipes.

Spiral welded pipes are single-sided welded and double-sided welded. The welded pipe shall ensure that the hydraulic test and the tensile strength and cold bending performance of the weld are in compliance with the regulations.

Spiral Submerged Arc-Welding Pipes

SSAW Pipe (Spiral Submerged Arc-Welding Pipe) also called HSAW pipe, welding line shaped like a helix. It is using the same welding technology of Submerged Arc-Welding with LSAW Pipes. Differently, SSAW pipe is spiral welded whereas the LSAW is longitudinally welded.

Manufacturing process is rolling the steel strip, to make the rolling direction have an angle with the direction of the pipe center, forming and welding, so the welding seam is in a spiral line. Applicable only to Carbon Steel Pipes.

Spiral Welded Steel Pipe Prices

Our Spiral Welded Steel Pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.
Our carbon pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Black Iron Pipes (B.I. Pipes)

Black Iron Pipes refers only to the surface treatment of the pipes, whereas it is treated or coated with black paint. It is applicable only to carbon steel pipes.

Black Iron Pipes are made of steel that has not been galvanized. Its name comes from the scaly, dark-colored iron oxide coating on its surface that prevents rust. Black steel pipes are cut and threaded to fit.

• Used for pipes in oil and petroleum industries
• For water, gas and sewerage purposes
• Low-pressure hot water heating pipes
• Water wells and pipes for various automotive and industrial applications

The primary purpose of black steel pipe is to carry natural gas into homes and businesses. The pipe is manufactured without a seam, making it a stronger and safer pipe to carry gas.

The black steel pipe is also used for fire sprinkler systems because it is more fire-resistant than galvanized pipe.

Black Iron Pipe Prices in the Philippines

VSteel Metal Asia has a wide selection of high-quality black iron pipes. Our black iron pipe prices will be available based on the current Philippine market and therefore you are assured of fair trade with us.

GALVANIZED IRON PIPES (G.I. PIPES)

Galvanized Iron (G) Pipes refers to the surface treatment of the pipes, whereas it is treated or coated with zinc coating through hot-dipped zinc bath. It is applicable only to carbon steel pipes.

Galvanized Iron Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges.

GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.

Galvanized Iron Pipes are classified into 3 Grades based on their weight per meter and inner diameter thickness. The more the thickness, better the performance and durability. According to the IS 1239, each pipe shall bear a color strip across the circumference for identifying the “class” of the GI pipes.

Galvanized Iron Pipe Prices

Solid Steel Supply has a wide selection of high-quality galvanized iron (GI) pipes. Our GI pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

Nippon Steel and Sumitomo Metal Corp. Pipes

Nippon Steel & Sumitomo Metal Corporation, was formed in 2012 with the merger of Nippon Steel and Sumitomo Metal. Nippon Steel was formed in 1970 with the merger of Fuji Iron & Steel and Yawata Iron & Steel. Nippon Steel & Sumitomo Metal Corporation is the world’s third largest steel producer by volume as of 2017.

Sumitomo & Nippon Steel Brands are widely used in Oil and Gas Sector, Refinary as on of their approved Vendor Lists.

Steel Pipes and Tubes

Steel pipes are used for a wide range of applications including line pipes for petroleum and gas and piping for plants, and play major roles in the development of urban areas and expansion of industries.

NIPPON STEEL & SUMITOMO METAL CORPORATION is manufacturing steel pipes for various kinds of highly reliable piping under integrated management from raw materials to products by excellent technologies and various kinds of advanced, highly efficient pipe manufacturing equipment.

Below are lists of Carbon Steel Pipes:

Sumitomo Metals & Nippon Steel Pipes Prices

VSteel Metal Asia is capable of supplying Nippon Steel & Sumitomo Pipe directly from their authorized agents. Other Japanese brands we can able to supply are JFE Corp and NKK Corp.

Our Sumitomo Metals & Nippon Steel pipe prices will be available based on the current market and therefore you are assured of fair trade from us.

Hyundai Steel Pipe

Hyundai Steel Co.. Ltd. or HSC (formerly knovm as Hyundai INI Steel, and before that. Incheon Iron & Steel Co., Ltd.) is a steel making company headquartered in Incheon and Seoul, South Korea, and a member of the Hyundai Motor Group. Established in 1953, it is the oldest steel making company in Korea.

Hot-rolled steel plates are rollformed into circular pipes and processed into Electric resistance Welded pipes
according to different specifications (OD, thickness, and material).

Although most ERW pipes are circular, some may be processed to be angulated into different shapes including square form. ERW pipes are categorized into ERW type and SAW type depending on the manufacturing method.

Hyundai’s Steel Pipe products are the result of superior knowledge and expertise. These steel pipes have been used for multiple purposes, from base materials for construction to infrastructure,
thereby contributing to the nation’s industrial development.

In particular, they are used extensively in various industries as waste water pipes, city gas pipes, pipes for construction sites, base materials for civil engineering projects, parts for automobiles, and parts for ships.

Main Steel Pipe Products are:

• Plumbing Pipes
• Line Pipes
• OCTGs
• Pipes for Computer Systems
• Steel Pipes for Structures
• Steel Pipe Piles
• Stainless Steel Steel Pipes

SeAH Steel Pipe

SeAH Steel has left a significant legacy in the steel industry by taking root of steel pipe manufacture industry in 1960, which v.,as the period of industrial wasteland. In 1967, we initiated the exportation of steel pipes for the first time to the United States which is the global leading market. Business opening was executed in 1969.

As a high-strength and high-performance product coming in shapes of fin-tube, square tube, gilt steel pipe, the SeAH steel pipe is utilized in various fields such as oil·gas, heat exchange, plumbing and rescue.

Product supply capacity has been expanded through large scale JCOE that is recently invested, and SAW equipment in addition to ERW (HFW)which is the major product.

Moreover, by promoting the manufacturing of OCTG complete product with the application of post-processing equipment such as QT facility and CNC screw machine, we are securing competitive edge to respond to various project demands from in and outside of the country.

Hyundai and SeAH Steel Pipes Prices

Our Hyundai and SeAH Steel Pipe prices will be available based on the current market and therefore you are assured with a fair trade from us.

VSteel Metal Asia is capable of supplying Hyundai Steel Pipes and SeAH Steel Pipes directly from their authorized agents. Please do not hesitate to send us your inquiries anytime with convenience.

Rectangular and Square Steel Tubing

Steel rectangular tubing and steel square tubing products are constructed from hot rolled metal coils that are hollowed out to create their tubular shape. Rectangle steel tube and steel square tubing products are also low in cost and offer a greater strength-to-weight ratio than other types of shaped metal products. In addition, rectangle steel tubes and square steel tubings are regularly utilized throughout the world for their outstanding strength and rigidity.

Rectangular and Square Steel Tubing Applications

Steel rectangular tube and steel square tube products are specifically designed to add additional strength to a project while also concealing wires, pipes, and other types of moving parts. Since steel square and rectangle tubes can be easily welded, punched, formed, and drilled, they provide a lightweight alternative to other types of steel products, such as wide flange steel and I-beams. Some of the applications that regularly utilize steel rectangular tubing and square steel tubing include:

1. Metal structures
2. General fabrication
3. Transportation equipment
4. Manufacturing
5. Frames
6. Truck beds

The construction and engineering industries use hollow structural sections (HSS). HSS is a form of steel tubing and is commonly circular, square, or rectangular. In the UK the term HSS is not used. Instead, the basic shapes are named CHS (circular), SHS (square), and RHS (rectangular).

Rectangular hollow structural sections (HSS) are commonly used in welded steel frames which are subjected to loading from different directions. Square and circular HSS are often used as columns.

Difference Between Square Tube and Rectangular Tube

The cross-section of the square tube is square; the cross-section of the rectangular tube is rectangular.

Square Tubes are used for:

• construction
• machinery manufacturing
• steel construction projects
• shipbuilding
• solar power brackets
• steel structure engineering
• power engineering
• power plants
• agricultural and chemical machinery
• glass curtain walls
• automotive chassis
• airports
• boiler construction
• highway railings
• building construction
• pressure vessels
• oil storage tanks
• bridges
• power station equipment

Square tubing is commonly used in industrial and domestic settings because of the numerous benefits it provides. Industries value square tubing for its strength and ability to withstand extremes of temperature, pressure and destructive elements. In domestic settings, square tubes are used in appliances, pipes, and fencing.

While rectangular tubes are used for:

• a large number of pipes that are used to transport fluids, such as petroleum, natural gas, water, gas, steam, etc.
• the manufacture of mechanical parts and engineering structure
• used to produce a variety of conventional weapons, barrels, shells, and soon.

Rectangular tubes are generally used for maintenance and structural purposes. Some examples of applications would be building construction, railings, and truck frames. They are measured by their outside dimensions and their wall thickness.

Which is Stronger, Square or Rectangle Tubing?

Obviously, this depends on the relative size of the sections. Assuming that the rectangular section’s smallest dimension is equal to (or greater than) the square section’s side and their thicknesses are equal, then the rectangular section will always be stronger than the square, for any load in any orientation.
Rectangular and square steel tubing provides great strength-to-weight ratios, which means that less steel by weight is required to accomplish the job. These tubing products also provide outstanding support and compression features, which allow this shape of steel to be used for a wide range of column applications.
For applications that require the strongest possible steel, the tube is generally the way to go. It’s known to be significantly stronger than the pipe, and one of the strongest metal formats period.

TUBULAR STEEL MATERIAL

• A36
• SS400
• Q235B, Q345B
• A500

AVAILABLE TUBULAR STEEL SIZES

• Thickness: 1.0mm to 40mm
• Width : up to 500mm Height: up to 500mm
• Length: 6M, 9M, 12M

Rectangular and Square Tubular Steel Prices in the Philippines

Our structural steel prices will be available based on the current Philippine market and therefore you are assured with a fair trade from us.

What are Valves?

Valves are products that are rarely noticed, yet they play a vital role in our daily life. Each time you turn on a water faucet or a gas range, or use your water heater, you operate a valve. Valves help preserve our quality of life by controlling flow of all types. They are essential to our homes and to virtually all manufacturing processes, as well as every industrial plant and system.

There are a large variety of valves and valve configurations for a wide variety of purposes and conditions: different uses (on/off, control), different fluids (liquid or gas; combustible, toxic or corrosive), different materials (metal or nonmetal) and different pressure and temperature conditions (low, medium or high pressure applications and low-, room- or high-temperature applications).

What is the difference between globe valve and gate valve?

Globe valves are usually used for flow regulation, while gate valves are often used for on-off control. Gate valves are cheaper than globe valves. Gate valves have little pressure drop across the valve and provide little resistance to the media flow in the open position.

What is the advantage of gate valve over globe valve?

Gate valves are an energy-efficient valve option, as the movement direction or ram is perpendicular to the media flow direction. As a result, less power is consumed when opening or closing the gate valves in comparison to globe valves. Due to their energy efficiency, they help reduce total ownership costs.

Valves Price

Our valves prices will be available based on the current market and therefore you are assured with a fair trade from us.

Pipe Fittings, Elbows, and Tees Supply

Pipe Fittings

A pipe fitting is used in pipe plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, and for other purposes, such as regulating or measuring fluid flow. Piping or tubing are usually (but not always) inserted into fittings to make connections. To avoid confusion, connections are conventionally assigned a gender of male or female, respectively abbreviated as “M” or “F”. An example of this is a “3/4 inch female adapter NPT,” which would have a corresponding male connection of the same size and thread standard (in this case, NPT).

While there are hundreds of specialized fittings manufactured, some common types of fittings are used widely in piping and plumbing systems.

Elbows

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5° elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Couplings

A coupling connects two pipes to each other. If the size of the pipe is not the same, the fitting may be called a reducing coupling or reducer, or an adapter. By convention, the term “expander” is not generally used for a coupler that increases pipe size; instead the term “reducer” is used.

Reducers

A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system, or to adapt to existing piping of a different size. Reducers are usually concentric but eccentric reducers are used when required to maintain the same top- or bottom-of-pipe level.

Tees

A tee is the most common pipe fitting. It is available with all female thread sockets, all solvent weld sockets, or with opposed solvent weld sockets and a side outlet with female threads. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs.

VSteel Metal Asia Selection

VSteel Metal Asia has a wide selection of flanges, Elbows, Tees, Caps, Reducer Couplings, Stubs, & many others.

A piece used for connecting lengths of pipes. Specifications and sizes are largely available for standards such as ASME/ANSI, ASTM, DIN, BS, KS, and JIS.

Pipe Fittings Prices in the Philippines

Our Pipe Fittings prices will be available based on the current Philippines market and therefore you are assured with a fair trade from us.

Flanges

A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object ; or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails).

Flanges are designed to the following pressure ratings: 150 lb, 300 lb, 400 lb, 600 lb, 900 lb,1500 lb and 2500 lb or 10 Bar, 15Bar, 25Bar, 40Bar, 64Bar, 100Bar and 150Bar. Various types of flanges are available depending upon the type of their constructional features.

Types are Slip On Blind, Weldneck, Socketweld, Threaded, Lap Joint, Orifice and Spectical Blinds, Spacers. Sizes available: 1/4″ through to any size. Wall thickness: Schedule 5s through to Schedule XXS and heavier. Special items according to customer drawings.

What are flanges for?

Flanges are generally used when there is a connection to valves, in-line instruments and/or connection to equipment nozzles is required. Flange fittings generally involve pressing two surfaces to be joined tightly together, by means of threaded bolts, wedges, clamps, or other means of applying high compressive forces.

Flanges are used to connect pipes with each other, to valves, to fittings, and to specialty items such as strainers and pressure vessels. A cover plate can be connected to create a “blind flange”. Flanges are joined by bolting, and sealing is often completed with the use of gaskets or other methods.

Forged flanges ASTM standards

Standard Grades according ASTM A / ASME SA182, F304/L and F316/L (dual marked and certified), ASME
B16.5, annealed and fully machined, raised face with spiral serrated and smooth finish (125-250 RMS / 3.2-
6.3 μm) to MSS SP-6, hardness to NACE MR0175, IC to ASTM A262E and PMI tested. With certificate to
EN10204/3.1.

Special Grades according ASTM A182, SAF2205 / F51, SAF2507 / F53, ASME B16.5, annealed and fully
machined, raised face with spiral serrated and smooth finish (125-250 RMS / 3.2-6.3 μm) to MSS SP-6. Hardness
to NACE MR0175, IC to ASTM A262E (G48A for SAF2507) and PMI tested. With certificate to EN10204/3.1.

Forged flanges ASTM standards

Standard Grades according ASTM A / ASME SA182, F304/L and F316/L (dual marked and certified), ASME
B16.5, annealed and fully machined, raised face with spiral serrated and smooth finish (125-250 RMS / 3.2-
6.3 μm) to MSS SP-6, hardness to NACE MR0175, IC to ASTM A262E and PMI tested. With certificate to
EN10204/3.1.

Special Grades according ASTM A182, SAF2205 / F51, SAF2507 / F53, ASME B16.5, annealed and fully
machined, raised face with spiral serrated and smooth finish (125-250 RMS / 3.2-6.3 μm) to MSS SP-6. Hardness
to NACE MR0175, IC to ASTM A262E (G48A for SAF2507) and PMI tested. With certificate to EN10204/3.1.

• ASTM Slip-on 150 / 300 lbs FFSO
• ASTM Welding neck 150 / 300 lbs FFWN
• ASTM Blind 150 / 300 / 600 lbs FFB
• ASTM Socket welding 150 / 300 lbs FFSW
• ASTM Lap joint 150 lbs FFLJ
• AS 2129 table flanges
• AS 4087 waterworks flanges

What are flanges for?

Our flange prices will be available based on the current Philippine market and therefore you are assured of fair trade from us.

Construction Supply

Solid Steel Supply is the Philippines’ leading and premium supplier of quality high grade construction materials. We can provide construction materials in the proper grade, ASTM standard and quantity to meet all of your steel construction requirements. We deliver on time!

1. Tools and Equipments

– Grinder, Speed Cutter, Drill, Welding Machine, Gas Cutting Torch, Gas Cutting Regulators, Welding
Cable, Fire Blanket, and many others.

2. Materials

– Corrugated Sheets, Ceramic tiles, Cement, Plastic Pipes, and many others.

3. Consumables

– Welding Electrode (GTAW, SMAW, FCAW), Paint, Personal protective equipments such as dust mask &
goggles, and many others.

Construction Supply Prices

Our construction supply prices will be available based on the current market and therefore you are assured with a fair trade from us.

Other Products

Solid Steel Supply Solid Steel Supply has a wide selection of Bolts and Nuts, Washers, all types of Gaskets, and Rock Wool, Mineral Wool, and Glass Wool Insulation.

Bolts and Nuts

A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together.

Washers

Washers are used to spread the load of a bolt or screw over a larger area or to help prevent loosening under vibration.

Gaskets

A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects.

Insulation

Industrial applications of mineral wool include thermal insulation (as both structural insulation and pipe insulation), filtration, and soundproofing. Mineral Wool Insulation is used for commercial buildings, industrial applications and residential construction.

Other Product Prices

Our product prices will be available based on the current market and therefore you are assured with a fair trade from us.

Steel Bolts and Nuts

Bolts are often made of steel, and where resistance is required to weather or corrosion, they may be galvanized, or stainless steel, brass, zinc or titanium may be used.

A bolt is a type of fastener, usually made from metal, that commonly comprises a head at one end, a chamfer at the other, and a shaft characterized by an external helical ridge known as a ‘thread’.

Bolts are typically used to hold materials or objects together, or to position objects.

Bolts typically require a nut which is applied via torque while the bolt is held in place or vice versa. Vibration or dynamic loads may loosen nuts, necessitating the use of lock nuts, lock washers or thread lockers which can provide resistance to loosening.

Material Specs for Bolts:
DIN931, ISO4014, DIN933, ISO4017, JIS B 1186 (F8T, F10T), ANSI B18.2.3.1, BS1768, ASTM A193, ASTM A307B, ASTM A325, ASTM A490

Material Specs for Nuts:
DIN934, ANSI B18.2.2, BS1768, ASTM A194, ASTM A563

Types of Bolts:
Machine, stud, eye, square, countersunk nib, counter sunk, special, hexagon head with dog point, t-bolt, u-bolt.

Steel Bolts and Nuts Prices

Our steel bolts and nuts prices will be available based on the current market and therefore you are assured with a fair trade from us.

Our product prices will be available based on the current market and therefore you are assured with a fair trade from us.

Gaskets

A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.

Gaskets allow for “less-than-perfect” mating surfaces on machine parts where they can fill irregularities. Gaskets are commonly produced by cutting from sheet materials.

Gaskets for specific applications, such as high pressure steam systems, may contain asbestos. However, due to health hazards associated with asbestos exposure, non-asbestos gasket materials are used when practical.

Most major manufacturing sectors, including the automotive, aerospace, electronics, appliance, and military industries, employ gaskets in their production methods.

Gaskets are available in a large number of specifications, making proper gasket selection an important step in many manufacturing processes. They can be formed from a wide range of materials, such as metals, rubbers, plastics, corks, foams, and composite substances.

Gasket Types:

Spiral wound, Kammprofile, Metal ring joint, Metal Jacket, Flange insulation set, Rubber coated ring joint, Pure graphite, Non-asbestos, EPDM.

Gasket Prices

Our gasket prices will be available based on the current market and therefore you are assured with a fair trade from us.

Other Pipe Parts

End Cap

A type of pipe fitting, usually liquid or gas tight, which covers the end of a pipe. A cap is used like plug, except that the pipe cap screws or attaches on the male thread of a pipe. A cap may have a solvent weld socket end or a female threaded end and the other end closed off. In plumbing systems that use threads, the cap has female threads. Industrial caps can be round, square, rectangular, U-shaped, I-shaped and may have a round hand grip or a flat hand grip.

Stub-End

A lap joints stub ends and it associated slip on flange in a piping system allows quick disconnection of the particular section involved. Stub ends are installed in pairs and mated together with two lap joint flanges. The surface of the stub end has a phonographic serrated gasket surface which prevents leakage at the joint. Using stub ends allows sections of the line to be opened for cleaning, inspection or quick replacement etc, without the need to re-weld.

Weldolet

Whenever branch connections are required in size where reducing tees are not available and/or when the branch connections are of smaller size as compared to header size, olets are generally used.

The following are few configurations of olet connections:

• Flanged Olet
• Socket-Weld & Threaded Olet
• Lateral & Elbow Olets
• Nipple Olet
• Butt-Weld Olet
• Swage Nipples

Pipe Parts Prices

Our pipe parts prices will be available based on the current market and therefore you are assured with a fair trade from us.